Intercom Speaker for Communications Used in Construction Hoist Elevator

• After-sales Service: Local Agent and on Line Support
• Warranty: 12 Months
• Type: Landing Door
• Load Capacity: Landing Door
• Usage: Construction Hoist
• Sling Type: Rack and Pinion
• Model NO.: ACOM
• Lift Drive / Actuation: Electric Motor
• Lift Mechanism: Motor and Gear
• Attendant: Without Attendant
• Deceleration Device: With Deceleration Device
• Elevator Door: Straight Fractional Door
• Cage Size: 3.2 X 1.5 X 2.2 M (L*W*H)
• Lifting Speed: 63 M/Min
• Mast Section: 650 X 650 X1508 mm
• Transport Package: Container Seafreight Packing
• Specification: CE
• Trademark: ANKA
• Origin: China
• HS Code: 8431
• Production Capacity: 400

Product Description

The intercom is made for the communications between the hoist cabin and building floor.

ANKA Hoist INTERCOM  system is a construction communication system,
specifically designed to provide a fail-safe, dedicated link between the
signalmen and operator. The system features a Two-Way communication
system and enables site operatives to communicate directly with the
Hoist operator.

The INTERCom system is easy to install and will operate on any
elevator/hoist with a power or steel wire cable going from the base to
the car. No antenna wires are needed. Signal is transmitting between the
car and building floor units by inducing onto the ground leg of power
cable or around the whole cable.

SPECIFICATIONS

Input Voltage   :      13-25VDC
Input Power   :     <3W (Alarm XMT), 100mW(Standby)
Output signal   :      <150Mw
Output Audio Power: <1W
Frequency of operation:

LED	CHANNEL	FREQUENCY
GREEN	1	250kHz (Factory Default)
RED	2	741kHz
YELLOW	3	800kHz