HOIST INTERCOM FOR CONSTRUCTION SITE COMMUNICATION
HoistCom system is a construction INTERCOM communication system, specifically designed to provide a fail-safe, dedicated link between the signalmen and operator. The system features a Two-Way communication system and enables site operatives to communicate directly with the Hoist operator.
HoistCom system is easy to install and will operate on any elevator/hoist with a power or steel wire cable going from the base to the car. No antenna wires are needed. Signal is transmitting between the car and building floor units by inducing onto the ground leg of power cable or around the whole cable
FEATURES
Intuitive operation.
Heavy duty Nylon plastic custom designed enclosure.
Easy to install, multiple choices for mounting onto walls, tie-wraps or screws can be used.
Emergency Alarm used to send an ALARM tone to all Com Units in an emergency.
Uses existing wiring with our specially designed Toroid, Transmitter/ Receiver coupling, to inductively couple an FM modulated signal onto existing power cables, which cables, safety lines etc.
Three field programmable frequency channels to eliminate voice bleed over between hoists. Channel 2 & 3 are high frequency channels designed to prevent EMI electrical interference noise caused by VFD (Variable frequency drive hoist systems).
Audited Supplier 
){kind=link}